LIVALL

First, make sure the PikaBoost motor is in its highest position (use the LIFT UP function in the app).  Then, place the device on the rear wheel of your bicycle. Gently tighten the four screws on t...

Before installing the Remote Controller, pair it with PikaBoost. Note that the Controller does not need to be paired with the app or your phone's Bluetooth — it pairs directly with the PikaBoost. I...

First, ensure that the PikaBoost wheel is in its highest position so there is enough space for the mudguard to pass through the motor swing arm and align with the mounting hole. Then align the mudg...

Please note: Due to varying laws and regulations in different countries and regions, cruise mode is not permitted in some areas. If you wish to use cruise mode, make sure it is legal in your locati...

PikaBoost 2 weighs about 3kg and provides assistance through friction with the bicycle tire. The tire formula is designed for a lifespan of 3,000–5,000km, suitable for bike tires with widths betwee...

The batteries have capacities of 158Wh and 220Wh, each weighing about 1kg. We recommend using a PD3.0 65W charger to charge from the rear port of the PikaBoost, which takes only 3 hours to fully ch...

First, please make sure the PikaBoost installation process was carried out correctly. One possible reason for this issue is that the motor was not lifted to the highest position before installation...

Since the shape of brake levers varies between different bicycle models, there is no fixed distance for installing the brake sensor. You can first attach one end of the sensor to the brake lever, t...

Pikaboost 2 has two independent battery monitoring systems - one in the main unit and one in the battery itself.We recommend charging the battery via the charging port at the rear of the PikaBoost ...

We recommend charging the device through the Type-C port at the rear. In addition, please make sure the charger and cable you use support the PD3.0 65W fast charging protocol. Due to the large batt...