First, make sure the PikaBoost motor is in its highest position (use the LIFT UP function in the app).
Then, place the device on the rear wheel of your bicycle. Gently tighten the four screws on the seatpost clamp, and also gently tighten the central locking screw.
At this stage, you do not need to fully tighten all five screws — this will allow you to adjust the device to the position that best suits your bike frame and rear wheel.
Once you have found the optimal position, fully tighten the screws.
Next, use the PUSH DOWN function in the app to complete the final installation step.
Click here to watch tutorial video
This installation guide can also solve most tire slipping issues. However, please note that if your bike has rear suspension, we do not recommend using PikaBoost. This is because rear suspension causes the frame and rear wheel to be unstable while riding, preventing PikaBoost from being securely fixed at the back, which could lead to the device falling off. In severe cases, it may cause breakage at the device's rigid connection points.
Comments
0 comments
Article is closed for comments.